f 🟢 This product ist available! Delivery time:
Germany: 5 - 6 working days
Other EU countries: 14 - 21 working days
Other countries: 4 - 6 weeks
Scale Seat Harness Noah
The scale seat harness Noah is not only a highlight in terms of appearance, you will also experience your overall system in a new way.
Since the motor is installed close to the center of gravity, there are only very low mass moments of inertia around all axes. The result is a very smooth flight behavior, so that can be flown extremely quietly and accurately.
By means of an integrated ballast system, the optimal wing loading can be quickly changed for the particular glider being flown and depending on the weather conditions.
The flight system is delivered already completely assembled.
This means: GRP inlay, motor, conversion motor with long motor shaft, bearing remote shaft, motor controller, ballast system, XT60E1 connector, foam drawer for the batteries and the folding propeller driver are already pre-assembled.
Two Hacker 2400mAh batteries are used, which are connected in parallel. This results in 4800mAh. The optimal design of the entire drive train, resulting low currents and a high aerodynamic efficiency of the propeller ensure long flight times. The batteries are plugged into permanently installed XT60E1 connectors, which are screwed to the GRP inlay. This makes plugging in the batteries easier and can be done with one hand.
The following components are already mounted and installed at delivery: