RC paraglider recumbent harness Aquila LX
RC paraglider flying over a green landscape with the RC paraglider recumbent harness Aquila LX
RC paraglider recumbent harness, kit scope
RC paraglider recumbent harness Aquila, scale couldn't be more realistic
RC paraglider battery holder, recumbent harness Aquila
RC paraglider RC board for RC recumbent harness
RC paraglider premium carrying-strap mount for RC paragliders
RC paraglider recumbent harness Aquila, inside view, motor side
RC paraglider recumbent harness, inside view
RC paraglider recumbent harness, hand grip recess
RC Paraglider Griffmulde von Aquila LX
RC Paraglider Liegegurtzeug Aquila Startposition
RC Paraglider Liegegurtzeug Aquila Startpositon kurz vorm Freigeben in die Luft
RC Paraglider Liegegurtzeug Aquila Startpositon Flug
RC Paraglider Liegegurtzeug beim Abwurf
RC Paraglider Beschleunigerführung Premium
RC Paraglider überfliegt grüne Landschaft mit RC Paraglider Liegegurtzeug Aquila LX in der Seitenansicht
RC Paraglider Tragegurtaufhängung Premium
RC Paraglider Libra 3.7 RS
RC Paraglider Libra 3.7 mit Liegegurtzeug Aquila LX
RC Paraglider mit Liegegurt Aquila und Libra 3.7 beim RAST Klapper
RC paraglider recumbent harness Aquila LX
RC paraglider flying over a green landscape with the RC paraglider recumbent harness Aquila LX
RC paraglider recumbent harness, kit scope
RC paraglider recumbent harness Aquila, scale couldn't be more realistic
RC paraglider battery holder, recumbent harness Aquila
RC paraglider RC board for RC recumbent harness
RC paraglider premium carrying-strap mount for RC paragliders
RC paraglider recumbent harness Aquila, inside view, motor side
RC paraglider recumbent harness, inside view
RC paraglider recumbent harness, hand grip recess
RC Paraglider Griffmulde von Aquila LX
RC Paraglider Liegegurtzeug Aquila Startposition
RC Paraglider Liegegurtzeug Aquila Startpositon kurz vorm Freigeben in die Luft
RC Paraglider Liegegurtzeug Aquila Startpositon Flug
RC Paraglider Liegegurtzeug beim Abwurf
RC Paraglider Beschleunigerführung Premium
RC Paraglider überfliegt grüne Landschaft mit RC Paraglider Liegegurtzeug Aquila LX in der Seitenansicht
RC Paraglider Tragegurtaufhängung Premium
RC Paraglider Libra 3.7 RS
RC Paraglider Libra 3.7 mit Liegegurtzeug Aquila LX
RC Paraglider mit Liegegurt Aquila und Libra 3.7 beim RAST Klapper
5 Sterne Bewertung

…I have the Aquila for my large wings and I am really thrilled with the model. While building it you notice how well thought-out and precise the kit is. Everything fitted straight away for me. Rework was...

.

RC Paraglider Reclined Harness Aquila LX

000345

Regular price €799,00 Save €-799,00
/
f
🟢 This product is in stock!

Delivery times:
Germany: 3 - 4 working days
Other EU countries: 7 - 14 working days
Other countries: 2 - 6 weeks

Para Aviation RC
Rico Priesnitz - ENGINEERING
Heusweilerstraße 3a
66571 Eppelborn / Germany
info@para-aviation-rc.com


Only 1 items in stock!

Notify me when this product is back in stock

AQUILA LX – RC reclined harness for larger RC paragliders

Para Aviation RC quality: developed and made in Germany

Developed with passion. Tested with experience. Made for a realistic flying look on RC paragliders.

The AQUILA LX is a 1:2.3 scale RC reclined harness for larger RC paragliders. We took everything we learned building the ROCKET V2 and developed it further for a bigger system.

Alongside the LIBRA 3.7 RS we worked out a mass layout designed for high pendulum stability, precise speed system routing, a controlled launch and RC electronics that are easy to reach from outside. Scale looks and technical function come together in a fully flight-tested system.

What you notice in the air and on the ground

  • A calmer system: battery, RC electronics and the optional ballast sit in defined positions.
  • Controlled hand launch: the proven grip recess gives you a clear grip point, well away from motor and propeller.
  • Precise speed system travel: double, tangential line routing reduces friction and avoids unnecessary play.
  • Quick access: the battery slide and the RC board go in and come out as complete units.

At a glance

Feature Specification
Product typeRC scale reclined harness, kit
Scale1:2.3
Designed forlarger RC paragliders
Reference setupLIBRA 3.7 RS with AQUILA LX
Overall length to spinnerapprox. 715 mm
Width of the main bodyapprox. 130 mm
Pilot shoulder widthapprox. 200 mm
Height to the pilot's headapprox. 390 mm
Empty weight without batteryapprox. 1,900 g
Delivered ascomprehensive kit

Note: the spinner is not included. The overall length still refers to the fully built model up to the spinner.

SCALE IS MORE THAN LOOKS HERE.

A large RC reclined harness has to do more than look good in the air. What counts is how cleanly the mass is distributed, how freely the lines run and how well the whole system can be launched and controlled.

That is exactly where the AQUILA LX comes in. Battery, RC components and the optional ballast system each have a defined place in the model. The titanium spreader bar guides the risers and speed system lines without any screw heads sticking out where the lines work. The integrated grip recess gives you a defined, repeatable grip point for the hand launch, well away from motor and propeller.

The result is a functional scale system built for a calm flying look, precise inputs and a clean build.

CALM FLIGHT COMES FROM THE RIGHT MASS LAYOUT.

The AQUILA LX was designed for pendulum-stable flight. Battery and RC electronics have fixed positions, so after every change the masses go back exactly where they belong.

For the best handling there is an optional ballast system. One form-fit weight sits above the motor and always stays in the model. Two more weights go in or come out right at the centre of gravity, no tools needed. So it is not only about how much ballast you use, but where that mass sits in the model.

This lets you fine-tune the take-off weight without long lever arms that would add extra pendulum movement.

ACCELERATE WITHOUT THE MECHANICS GETTING IN THE WAY.

The titanium spreader bar combines the riser attachment and the premium speed system routing in one design. There are no protruding screw heads where the lines work, so nothing for the lines to catch on.

The speed system lines run tangentially to the risers. This gives clearly defined line paths with as little friction on edges as possible. You can dose the speed system finely with the elevator stick. That supports active flying and precise corrections, without play in the mechanics distorting your input.

THE GRIP RECESS MAKES THE HAND LAUNCH CONTROLLABLE.

With a large RC paraglider, the throw decides the first seconds of the flight. That is why we developed the position of the grip recess over countless launch tests.

It sits far enough from motor and propeller, stabilises the RC harness during the throw and lets your fingers slide freely out of the grip as you let go. At the same time you can give the model some extra speed right before release.

Together with the LIBRA 3.7 RS this allows hand launches even in no wind, with a take-off weight of up to 6 kg.

BATTERY OUT, BATTERY IN... POSITION STAYS.

The battery slide and the battery form one compact, removable unit. A quick-release fastener holds it in the model and brings the battery back to exactly the same position after every change.

No more re-tightening hook-and-loop straps, and much less risk of fitting the battery in a different spot without noticing. Charge, swap, slide back in.

RC ELECTRONICS TIDY AND ACCESSIBLE FROM OUTSIDE.

ESC, receiver and vario each get a fixed place on the separate RC board. The board also has a quick-release fastener and goes in or comes out as a complete unit.

All components stay accessible from outside. The clear layout also helps with clean cable routing and makes checks, maintenance and troubleshooting easier.

A KIT, BUT NOT A PUZZLE.

The main body is made of precisely milled industrial GRP parts with prepared threaded inserts and matched aluminium spacers. The battery tray and the RC board come pre-assembled with the quick-release system.

The manual in German and English guides you through the build step by step. It shows not only the order, but also the correct position of the parts, line routing and angles.

The AQUILA LX is a model building project that is a lot of fun. The build is well prepared by design and clearly documented.

A SCALE FLYING LOOK THAT WORKS TECHNICALLY.

Pilot, fabric harness, painted head, clothing and scale hands create the realistic appearance. Under the fabric, though, there are no show-only details, but a GRP main body, a front shock absorber system, defined mounting positions and mechanics built for flying.

So the AQUILA LX is not a display model with a motor. It is a flight-tested RC reclined harness where scale looks and technical function were developed together.

Key advantages

Pendulum-stable design

Thanks to a well thought-out mass layout and the optional ballast system, the Aquila LX flies particularly calmly. Even in thermals or during demanding manoeuvres.

Titanium spreader bar with premium speed system routing

The light and stiff titanium spreader bar combines riser attachment and speed system routing in one design. The speed system lines run double and tangential to the risers. This gives clearly defined line paths with as little friction and play as possible.

Grip recess for controlled hand launches

The position of the grip recess was developed in countless launch tests. It gives you a defined grip point away from motor and propeller, stabilises the model during the throw and lets your fingers come free cleanly at release.

Quick-change battery system and RC board

The battery slide brings the battery back to the same position after every change. ESC, receiver and vario have fixed places on the separate RC board. Both units go in and out quickly. That makes battery changes, checks, maintenance and troubleshooting easier.

Scale looks with technical function

Pilot, fabric harness, painted head, clothing and scale hands give a realistic appearance. Underneath work a precisely milled GRP main body, prepared mounting positions and mechanics developed for flying.

Compatibility

The AQUILA LX was developed together with the LIBRA 3.7 RS. Other larger and smaller RC paragliders can be used as well, as long as wing size, intended take-off weight, riser geometry, wing loading and power setup match. If your setup is different, we recommend a quick chat before you buy.

Who is the AQUILA LX for?

The AQUILA LX is for RC paraglider pilots who want to build a larger, true-to-scale reclined harness and match motor, electronics and wing carefully to each other.

It suits you especially if you:

  • want to fly a larger RC paraglider with a realistic reclined harness
  • care about calm flight and a well thought-out mass layout
  • want to control the speed system precisely, with cleanly routed lines
  • want to reach and change battery and RC components quickly
  • are looking for a high-quality model building project and do not expect a ready-to-fly set

Which RC paragliders fit the AQUILA LX?

The AQUILA LX was developed in 1:2.3 scale alongside the LIBRA 3.7 RS.

Beyond that, the reclined harness can be used with many other larger and smaller RC paragliders. Promising compatibility with every wing would not be technically honest, though. What matters includes wing size, intended take-off weight, riser geometry, wing loading and power setup.

What's included

  • milled main body made of industrial GRP with prepared threaded inserts
  • aluminium spacers and all screws needed for the basic build
  • titanium spreader bar with premium speed system routing and riser attachment
  • premium paraglider attachment
  • two Dyneema speed system lines with attachment units and quick-change system
  • front shock absorber system with foam dampers
  • motor mounting set
  • battery tray with battery slide, hook-and-loop straps and quick-release system
  • RC board with mount and quick-release system
  • preparation for the optional ballast system
  • AQUILA LX fabric harness
  • scale pilot with painted head, head mount, clothing and hood
  • scale arms and hands with integrated low-friction rings
  • detailed manual in German and English

Not included

  • RC paraglider
  • four servos and matching servo arms
  • motor and ESC
  • propeller and spinner
  • flight battery and charger
  • transmitter and receiver
  • vario and logger
  • optional ballast system with weights

The right motor, ESC, propeller, battery and servos depend on the wing you use and the take-off weight you want. The current manual names the Hacker A50-12S V4 with 510 kV as a suitable motor for the AQUILA LX.

Advice

A large RC paraglider only really works when wing, reclined harness, power system, electronics and take-off weight match. If you need help with your setup, we are happy to advise you personally before you buy.

Plan your AQUILA LX setup with us

Frequently asked questions about the AQUILA LX

Is the AQUILA LX ready to fly?
No. The AQUILA LX comes as a comprehensive kit. For a flyable system you also need a paraglider, four servos, motor, ESC, propeller, spinner, battery, transmitter, receiver and, depending on your setup, a vario.
Is the scale pilot included?
Yes. The kit includes the scale pilot with painted head, head mount, clothing, hood and scale arms and hands. The servos for the arms and the speed system are not included.
Which RC paraglider suits the AQUILA LX best?
The AQUILA LX was developed together with the LIBRA 3.7 RS in 1:2.3 scale. Other RC paragliders can be used as well, as long as wing size, take-off weight, suspension and power setup match. If your setup is different, we recommend a quick chat before you buy.
Which motor is intended for the AQUILA LX?
The current manual names the Hacker A50-12S V4 with 510 kV as a suitable motor. ESC, propeller and battery need to be chosen to match it and your planned take-off weight.
What does the grip recess do for the launch?
The grip recess gives you a defined grip point away from motor and propeller. Its position supports a smooth throw, lets your fingers come free cleanly and allows you to add speed right before release. With the reference setup of AQUILA LX and LIBRA 3.7 RS, hand launches were made with up to 6 kg take-off weight.
Is the ballast system included?
No. The preparation and mounting points are part of the AQUILA LX. The shaped ballast weights are available separately and, depending on the setup, go above the motor and right at the centre of gravity.
Is there a build manual?
Yes. A detailed manual in German and English guides you through the whole build. It shows the parts, assembly order, mounting positions, speed system routing, launch technique and ballast system.